Nissan Altima (L34) 2019-2024 Owners Manual: Resetting the drive computer

The drive computer is divided across three screens:

• Speed
• Trip Distance & Time
• Fuel Economy

1. Press the or buttons until the desired drive computer screen is displayed.

2. Press the OK button to bring up the drive computer Reset menu.

3. Use the or to select the desired option. Then press the OK button:

• "Cancel" - returns to the previous screen without resetting the trip computer.
• Drive computer value - resets only the displayed drive computer value.
  • "Average Speed" - resets the average speed of the selected drive computer screen.
  • "Distance & Time" - resets the distance and time of the selected drive computer screen.
  • "Fuel Economy" - resets the fuel economy of the selected drive computer screen.
• "All" - resets all linked drive computer values.

  This includes distance & time, average fuel economy and average speed information.

Oil control system (if so equipped)

The oil control system can be accessed in the Maintenance portion of the vehicle information display settings.

Engine oil information informs the distance to oil change. Never exceed one year or 7,500 miles (12,000 km) between oil change intervals for the 2.0L 4 cylinder (KR20DDET engine model) or 10,000 miles (16,000 km) between oil change intervals for the 2.5L 4 cylinder (PR25DD engine model).

The oil change interval cannot be adjusted manually.

The distance to oil change interval is calculated depending on the driving conditions and set automatically by the oil control system.

A reminder will be displayed when approaching the end of the service interval.

When the Factory Reset option is selected in the vehicle information display, the oil control system will also be reset to initial value. Please change the engine oil when Factory Reset is selected.

CAUTION

If the oil replacement indicator is displayed, change the engine oil within two weeks or less than 500 miles (800 km).

Operating the vehicle with deteriorated oil can damage the engine.

To reset oil control system:

1. Place the ignition switch in the ON position.

2. Press the and buttons located on the steering wheel until "Settings" displays in the vehicle information display.

Use to select "Maintenance".

Then, press the OK button.

3. Select "Oil Control System" and press the OK button.

4. Press the OK button according to the reset instructions displayed at the bottom of the "Oil Control System" maintenance screen.

5. For additional information, refer to the separate maintenance booklet.