Nissan Altima manuals

Nissan Altima (L34) 2019-2024 Owners Manual: Programming HomeLink for Canadian customers and gate openers

Canadian radio-frequency laws require transmitter signals to "time-out" (or quit) after several seconds of transmission - which may not be long enough for HomeLink to pick up the signal during training. Similar to this Canadian law, some U.S. gate operators are designed to "timeout" in the same manner.

If you live in Canada or you are having difficulties training a gate operator or garage door opener by using the "Training" procedures, replace "Programming HomeLink" step 2 with the following:

NOTE:

When programming a garage door opener, etc., unplug the device during the "cycling" process to prevent possible damage to the garage door opener components.

1. For additional information, see "Programming HomeLink" step 1.

2. Using both hands, simultaneously press and hold the desired HomeLink button and the hand-held transmitter button.

During training, your hand-held transmitter may automatically stop transmitting.

Continue to press and hold the desired HomeLink button while you press and re-press ("cycle") your hand-held transmitter every 2 seconds until the frequency signal has been learned. The HomeLink indicator light will flash slowly and then rapidly after several seconds upon successful training. DO NOT release until the HomeLink indicator light flashes slowly and then rapidly.

When the indicator light flashes rapidly, both buttons may be released. The rapid flashing indicates successful training.

Proceed with "Programming HomeLink" step 3 to complete.

If the device was unplugged during the programming procedure, remember to plug it back in when programming is completed.

Operating the HomeLink Universal Transceiver

The HomeLink Universal Transceiver, after it is programmed, can be used to activate the programmed device. To operate, simply press and release the appropriate programmed HomeLink Universal Transceiver button. The amber indicator light will illuminate while the signal is being transmitted.

For convenience, the hand-held transmitter of the device may also be used at any time.

Programming HomeLink

If you have any questions or are having difficulty programming your HomeLink buttons, refer to the HomeLink website at: www.homelink.com or call 1-800-355-3515. NOTE: Place the ignition switch in the ...

Programming trouble-diagnosis

If the HomeLink does not quickly learn the hand-held transmitter information: Replace the hand-held transmitter batteries with new batteries. Position the hand-held transmitter with its battery a ...