Nissan Altima (L32) 2007-2012 Service Manual ≻ Lan system can fundamental ≻ Function diagnosis ≻ Diag on can

Nissan Altima (L32) 2007-2012 Service Manual: Diag on can

Description

“Diag on CAN” is a diagnosis using CAN communication instead of previous DDL1 and DDL2 communication lines, between control units and diagnosis unit.

System Diagram

Can communication system

System Description • CAN communication is a multiplex communication system. This enables the system to transmit and receive large quantities of data at high speed by connecting control units wi ...

Trouble diagnosis

Condition of Error Detection “U1000” or “U1001” is indicated on SELF-DIAG RESULTS on CONSULT-III if CAN communication signal is not transmitted or received between units for 2 seconds or m ...

Other materials:

Sonar limitations
WARNING Listed below are the system limitations for the sonar system. Failure to operate the vehicle in accordance with these system limitations could result in serious injury or death. The system is deactivated at speeds above 6 mph (10 km/h). It is reactivated at lower speeds. Inclement weath ...

Turning the I-FCW system on/off
For vehicles with the 7 inch (18 cm) display Perform the following steps to turn the I-FCW system ON or OFF. For vehicles with the 7 inch (18 cm) display. 1. Press thebutton until "Settings" displays in the vehicle information display. Use the button to select "Driver Assistance." Then press the ...

2.0L 4 cylinder (KR20DDET engine model)
The following shows the maintenance schedule. Choose the maintenance schedule needed based on your vehicle driving conditions. After 90,000 miles (144,000 km)/144 months, continue maintenance at the same mileage/time interval. NOTE: For information regarding coolant or spark plug replacement, see ...