Nissan Altima (L34) 2019-2024 Owners Manual: Trip computer

1. Home

This display indicates the home screen.

2. Vehicle speed

The vehicle speed mode shows the current vehicle speed and the average vehicle speed since the last reset.

Average vehicle speed:

Press and hold the OK button on the steering wheel to bring up the drive computer Reset menu, and follow the instructions to reset.

The average vehicle display is updated every 30 seconds. the first 30 seconds after a rest, the display shows "- - -’

3. Blank

This display is a blank screen and shows no information.

4. Fuel economy display

Current fuel consumption:

The current fuel consumption mode shows the current fuel consumption.

Average fuel consumption:

The average fuel consumption mode shows the average fuel consumption since the last reset. Press and hold the OK button on the steering wheel to bring up the drive computer Reset menu, and follow the instructions to reset.

The display is updated every 30 seconds.

For about the first 1/3 of a mile (500 m) after a reset, the display shows "- -."

5. Elapsed time and trip odometer

Elapsed time:

The elapsed time shows the time since the last reset. Press and hold the OK button to bring up the drive computer Reset menu, and follow the instructions to reset.

Trip odometer:

The trip odometer shows the total distance the vehicle has been driven since the last reset. Press and hold the OK button on the steering wheel to bring up the drive computer Reset menu, and follow the instructions to reset.

6. Tire Pressures

The tire pressure mode shows the pressure of all four tires while the vehicle is driven.

When the "Tire Pressure Low - Add Air" warning appears, the display can be switched to the tire pressure mode by pushing the or switch to reveal additional details on the displayed warning.

For additional information, see "Low tire pressure warning light", "Tire Pressure Monitoring System (TPMS)", "Flat tire" and "Types of tires".

7. Variable Compression Turbo (if so equipped)

This is not a physical gauge. It is a display option in the vehicle information display that can be selected. For additional information, see "Variable Compression Turbo".

8. Traffic Sign Recognition (if so equipped)

The Traffic Sign Recognition (TSR) system provides the driver with information about the most recently detected speed limit.

For additional information, see "Traffic Sign Recognition (TSR).

9. Compass (if so equipped)

This display indicates the direction the vehicle is heading.

10. Navigation (if so equipped)

When the route guidance is set in the navigation system, this item shows the navigation route information.

11. Audio

The audio mode shows the status of audio information.

12. ProPILOT Assist (if so equipped)

The ProPILOT Assist mode shows operating conditions for the following systems:

• Intelligent Cruise Control (ICC)
• Steering Assist

The display will also be shown when the ProPILOT Assist is turned on. For additional information, see "ProPILOT Assist".

13. Driving Aids

The driving aids mode shows the operating condition for the following systems (if so equipped):

• Forward
  • Automatic Emergency Braking (AEB) with Pedestrian Detection system
  • Intelligent Forward Collision Warning (I-FCW)
• Lane:
  • Lane Departure Warning (LDW)
  • Intelligent Lane Intervention (I-LI)
• Blind Spot:
  • Blind Spot Warning (BSW)

For additional information, see "Blind Spot Warning (BSW)", "Lane Departure Warning (LDW)", "Automatic Emergency Braking (AEB) with Pedestrian Detection", "Intelligent Forward Collision Warning (I-FCW)". or "Intelligent Lane Intervention (I-LI)".

14.Warnings

The warnings mode allows the driver to view any present warnings.

NOTE:

The warnings mode will only display if any are present.

15. Settings

The settings mode allows the driver to view or modify settings.

Resetting the drive computer

The drive computer is divided across three screens:

• Average Speed
• Average Fuel Economy
• Trip Distance & Time

1. Press the buttons until you reach the desired drive computer mode.

2. Press and hold the OK button for approximately 1 second to reset the information on the currently displayed screen.

NOTE:

If you wish to reset all drive computer values at once, press and hold the OK button for approximately 3 seconds until a reset menu appears; and follow the instructions.